Featured Seth Thomas brass mantel clock

Discussion in 'Antique Discussion' started by Mega4, Feb 25, 2025.

  1. Mega4

    Mega4 New Member

    I inherited this 18" Seth Thomas brass mantel clock from my mother, then held onto it for a few decades for good measure.
    I believe it was an antique back when it was displayed in our house back in the early '50s. The sound of it chiming was the soundtrack of my childhood!
    The pendulum has fallen off, and I'm not sure how to re-install it, so winding it doesn't get the clock going (I think it always relied on the swinging pendulum for that)
    Any ballpark ideas of what this might be worth would be very much appreciated.

    IMG_1228.jpg IMG_1229.jpg IMG_1231.jpg IMG_1232.jpg IMG_1233.jpg IMG_1234.jpg IMG_1236.jpg IMG_1237.jpg IMG_1238.jpg
     
  2. Debora

    Debora Well-Known Member

    Figtree3, sabre123, Bronwen and 2 others like this.
  3. 808 raver

    808 raver Well-Known Member

    I think you just unscrew the bell via the nut and hang the pendulum, then make sure it's wound both sides and start the pendulum by lifting it to one side to start the swing.
     
    Figtree3, sabre123, Bronwen and 2 others like this.
  4. Roaring20s

    Roaring20s Well-Known Member

    "...winding it doesn't get the clock going (I think it always relied on the swinging pendulum for that)"

    If it has been wound recently, then without the pendulum it would tick very quickly. Do not wind it any more. Not having used it in decades also means that the oils have hardened and it will not run or run a bit and stop. The movement needs cleaning.

    If you only wish to put the pendulum back in place, the 808 raver suggestion is the way to go.

    Screen Shot 2025-02-25 at 7.02.20 PM.png
     
    Figtree3, sabre123, Bronwen and 2 others like this.
  5. Mega4

    Mega4 New Member

    Thanks for the advice re: winding. Also, the diagram for reattaching the pendulum. I recall removing the bell, and trying to hang the pendulum, but it didn't quite want to stay there. I believe it was the second example you gave, and it tended to fall off. I'll have another look in the morning to try to figure out what's happening.
     
    Figtree3, Bronwen and Ghopper1924 like this.
  6. Mega4

    Mega4 New Member

    Figtree3, Bronwen and Ghopper1924 like this.
  7. Roaring20s

    Roaring20s Well-Known Member

  8. Ghopper1924

    Ghopper1924 Well-Known Member

    Beautiful Neo-Classical Revival clock, and evidently well worth a maintenance visit to a clock repair person. Envious!!
     
    Figtree3, sabre123 and Bronwen like this.
  9. Debora

    Debora Well-Known Member

    I had never heard the term "portico clock" before. Will add it to my vocabulary.

    Debora
     
  10. kentworld

    kentworld Well-Known Member

    Is that term in one of the links? I have never heard it before either, but quite apt for the type of structure!
     
    Figtree3 likes this.
  11. Debora

    Debora Well-Known Member

    Figtree3 and kentworld like this.
  12. Roaring20s

    Roaring20s Well-Known Member

    I guess portico is fine, temple works too. :)
     
    Figtree3 and kentworld like this.
Draft saved Draft deleted
Similar Threads: Seth Thomas
Forum Title Date
Antique Discussion How old is my Seth Thomas Clock? Feb 4, 2022
Antique Discussion Seth Thomas wall clock help with age please Apr 3, 2021
Antique Discussion Need Information Seth Thomas Sep 20, 2020
Antique Discussion Seth Thomas Clock How Old Is It? Jan 21, 2019
Antique Discussion Seth Thomas Shelf Clock Identification Help - Vigil? Jul 21, 2018

Share This Page