Featured Sewing machine desk

Discussion in 'Furniture' started by Gillespie, Jan 29, 2017.

  1. Gillespie

    Gillespie Active Member

    Hello there folks! I have had this old sewing machine base kicking around here since 2008.
    I picked it up on the side of the road, it was being thrown out.

    I decided to finally do something with it and have built a new top for it. But still need to build a droor or three under the desk's top.

    It should make an ideal computer desk, or a sewing machine table! Go figure haha:)

    I am not sure however what year the cast metal sewing machine base is from. Any ideas?
    I searched a bit, but haven't found anything yet.

    Here are a couple pics bringing you up to date to where the project is now.

    -
    IMG_2201.JPG IMG_2202.JPG IMG_2203.JPG The exposed unstained plywood is the top. You can see the Craig jig screws fastening the maple noseing on.
    But once the tile is siliconed into place it will all be hidden.

    IMG_2204.JPG The bottom side turned out decent as well.
    The stain I had was black. But I cut it with gasoline to create a grey stain.
    IMG_2207.JPG This tile was 2 feet by 4 feet! It got cut down to 2feet by 3feet. IMG_2209.JPG the tile isn't siliconed down yet.
    I need to get some more maple, and decide what I'm doing for droors.

    It's been a fun little project so far tho!
     
  2. KingofThings

    KingofThings 'Illiteracy is a terrible thing to waist' - MHH

    Very nice!
    Maybe Shangas can help with dating it.
    Unless there have been noticeable design differences over time these were made for a long time and may be hard to even guess the decade.
     
  3. Debora

    Debora Well-Known Member

    Quite a nice shape.

    Debora
     
    KingofThings likes this.
  4. judy

    judy Well-Known Member


    I love it just as it is, and it makes a great side table in any room.
     
    KingofThings likes this.
  5. Bakersgma

    Bakersgma Well-Known Member

    Nice job of converting something old to modern use!

    As for "how old" - note that the name ROYAL has been incorporated into the scrolling on the side supports. Not sure what that means, but others may know.
     
    Ladybranch and KingofThings like this.
  6. tie.dye.cat

    tie.dye.cat Well-Known Member

    Very nice! I always think sewing machine bases are so underrated; there's so much you could do with one if you are creative. Yet you can't barely give them away usually.

    I really like what you did with yours.
     
    KingofThings likes this.
  7. KingofThings

    KingofThings 'Illiteracy is a terrible thing to waist' - MHH

    You are SO correct. I think I have one disassembled and packed away waiting.......
    :wideyed:
     
  8. Aquitaine

    Aquitaine Is What It IS! But NEVER BORED!

    1880's sounds like a nice vintage for it!!!
     
    Ladybranch and KingofThings like this.
  9. Gillespie

    Gillespie Active Member

    1880 eh?
    Nice, it's most deffinently old!
     
    KingofThings likes this.
  10. Gillespie

    Gillespie Active Member

    Thanks for all the feedback folks
     
    KingofThings likes this.
  11. Ladybranch

    Ladybranch Well-Known Member

    Found a history of the Royal Machine Co. of Birmingham, England. Seems the company was formed c1868 and ceased operations in 1888. The competition of the Singer sewing machine company and that of Jones more or less put them out of business. The following website has a history of Royal. About 2/3 to 3/4 of the way down the page under the section "Royal Machine Manufacturing Company 1882" is one of their advertisements showing a treadle & cabinet model. The scrolling legs look similar to your table.

    http://www.sewalot.com/Royal_sewing_machine_sewalot.htm

    --- Susan
     
    KingofThings, Bakersgma and Figtree3 like this.
  12. Aquitaine

    Aquitaine Is What It IS! But NEVER BORED!

    OOOOOH!!!!! NICE find Susan!!!!!
     
    KingofThings likes this.
  13. Poisonivy

    Poisonivy Well-Known Member

    There are hundreds of those around here in the Uk, Singer usually.
    They get used for garden tables and often pubs use them too. Its nice to see them put to good use.

    Yours looks great.
     
    KingofThings likes this.
  14. Gillespie

    Gillespie Active Member

    IMG_2212.JPG Thanks!

    We don't really have a spot for it, or need for it.
    I'm thinking of selling it. But it will be hard to sell once it's finished, and I have no idea what to ask for it.

    The cast metal base has c shaped legs/ verticals.
    I could easily hide wire and run it up the inside of the metal base.
    Then have a plug on the back side of the droors with hdmi plug ins.

    And have the plug/ cord for the desk coming out of the metal base at standard plug level.

    Install some led lights inside the droors that illuminate when the droor is open, and it would be a pretty fancy unit

    And hard to let go of/ sell in sure..
     
    KingofThings likes this.
  15. vintagerobin

    vintagerobin Well-Known Member

    Until recently, old sewing machine bases were selling for 20 or 30 dollars. Right now, bases alone, are selling for 75 to 100 in as found condition.
     
Draft saved Draft deleted
Similar Threads: Sewing machine
Forum Title Date
Furniture Singer Sewing Machine doubt Mar 15, 2023
Furniture Need a year on this sewing machine any ideas? Jun 26, 2016
Furniture Help with sewing table Jun 18, 2022
Furniture Sewing table era? May 30, 2021
Furniture Sewing Rocker Dec 17, 2020

Share This Page