~3 1/8" long overall, ~3/4" square. Amber-colored, slightly translucent; weight ~2 5/8 oz. I think it's Chinese mostly for the horse; soapstone...
Gobble Gobble, 'til you Wobble! Blessed Be, each an' every one. I'm grateful to be with all of you, an' Thanks!
This block weighs ~16 oz; the sheave is for ~1/2 or 3/8 inch line. The shoe-nail is my temporary solution to a missing brass cotter key. The logo...
The enameled face is 0.400" diameter, the Greenduck Co, Chicago back is 0.550" diameter. The card is ~1.250" square. Weight is 2.2 grams on the...
The frame is 10 3/4" by 7 3/4"; the image is 7 1/8" by 4 1/4". The look is as if matted, but it isn't; the image ground is white, the 'mat' is a...
~613 grams of wood an' steel; the shaft is a ~5/8" chamfered octagonal; the blade is ~1/4" thick, an' is not welded to the shaft, but tenoned into...
A case could be made for this to be more appropriately shown in Metalwork. Decisions about such finicky minutia are wholly beyond this mortal....
It's ~9" long, ~1" square, with the blade 4" long by ~1 3/4" wide; the eye is ~1 1/16" by ~9/16". Weight is ~31 oz. Neither the blade edge nor the...
This is 2 9/16" square, ~1" high; it weighs ~3.9 oz. The silver-plating is almost totally gone. The bottom is dead-flat an' unmarked. It is...
This is 9 3/4" long; the triangular blade is ~2 5/8" wide, ~2 3/4" deep, ~5/16" thick at its joint with the shaft, which is ~3/4"square at that...
This one is 14 3/4" long, the shallow bowl is 4 3/8" by 3 1/4"; where the handle joins the bowl it's ~1 1/4 thick, the same as the 'vented'...
This is about 12 1/2" long, the handle is 1 3/16" wide at the big end an ~7/16 thick; the bowl is 3 11/16" long inside, measured 90 degrees from...
This is 20" long; the bowl is 3 3/4" long, ~3" wide, ~1 3/4" deep outside, with a capacity of perhaps ~4 oz. Weight is ~7 1/2 oz. It appears...
It's ~8 3/4" long, the bowl is ~3" X ~2 3/8"; weight is ~74 grams. Someone has hammered with it; there are 3 minor an' 1 major ding in the...
Overall length is 21 3/4", blade length to previous grip-line is 16", the blade is ~7/32" thick at the grip, tapering very slightly to ~3/16" at...
Length in its sheath is 19 1/4"; the blade is 14". There are no markings that I can see, save for the muted hook an' saw teeth near the hilt;...
Upfront; my apology if I have shown this here previously...I cannot recall doing so, but such is my memory that I may very well have. This is 10"...
What a treasure, this amazing person. Truly a woman to respect an' admire. Eternal Peace, Fair Lady!
The cardboard disk is ~29.5cm diameter; the 20 Saw Tooth Wire samples are ~6 to 8cm in length. Made in England, the illegible stamped information...
To offer a glimpse of the crowd I occasionally run with; one of them asked if Taiwan made things out of gold...he owns this thing. It's 5 3/4"...
Separate names with a comma.
