The frame is 10 3/4" by 7 3/4"; the image is 7 1/8" by 4 1/4". The look is as if matted, but it isn't; the image ground is white, the 'mat' is a...
~613 grams of wood an' steel; the shaft is a ~5/8" chamfered octagonal; the blade is ~1/4" thick, an' is not welded to the shaft, but tenoned into...
A case could be made for this to be more appropriately shown in Metalwork. Decisions about such finicky minutia are wholly beyond this mortal....
It's ~9" long, ~1" square, with the blade 4" long by ~1 3/4" wide; the eye is ~1 1/16" by ~9/16". Weight is ~31 oz. Neither the blade edge nor the...
This is 2 9/16" square, ~1" high; it weighs ~3.9 oz. The silver-plating is almost totally gone. The bottom is dead-flat an' unmarked. It is...
This is 9 3/4" long; the triangular blade is ~2 5/8" wide, ~2 3/4" deep, ~5/16" thick at its joint with the shaft, which is ~3/4"square at that...
This one is 14 3/4" long, the shallow bowl is 4 3/8" by 3 1/4"; where the handle joins the bowl it's ~1 1/4 thick, the same as the 'vented'...
This is about 12 1/2" long, the handle is 1 3/16" wide at the big end an ~7/16 thick; the bowl is 3 11/16" long inside, measured 90 degrees from...
This is 20" long; the bowl is 3 3/4" long, ~3" wide, ~1 3/4" deep outside, with a capacity of perhaps ~4 oz. Weight is ~7 1/2 oz. It appears...
It's ~8 3/4" long, the bowl is ~3" X ~2 3/8"; weight is ~74 grams. Someone has hammered with it; there are 3 minor an' 1 major ding in the...
Overall length is 21 3/4", blade length to previous grip-line is 16", the blade is ~7/32" thick at the grip, tapering very slightly to ~3/16" at...
Length in its sheath is 19 1/4"; the blade is 14". There are no markings that I can see, save for the muted hook an' saw teeth near the hilt;...
Upfront; my apology if I have shown this here previously...I cannot recall doing so, but such is my memory that I may very well have. This is 10"...
What a treasure, this amazing person. Truly a woman to respect an' admire. Eternal Peace, Fair Lady!
The cardboard disk is ~29.5cm diameter; the 20 Saw Tooth Wire samples are ~6 to 8cm in length. Made in England, the illegible stamped information...
To offer a glimpse of the crowd I occasionally run with; one of them asked if Taiwan made things out of gold...he owns this thing. It's 5 3/4"...
I've got my Dad's, who built airplanes from wood an' fabric in the 1930's. Thank you sincerely for this assistance!...
Do we have among our members any old sheet music curators or collectors? I've been handed maybe 30 of them, in see-through sleeves...most in...
The oval base is slightly recessed, ~3 1/4" X ~1 5/8"; weight is ~19.2 oz. The lip is 1" diameter, with a 0.485" mouth. The overall finish is very...
It is ~3 3/4" long, ~3 1/8" wide, ~2" high with cover in place; it weighs ~2 3/4 oz. The plating is mostly gone, save for the exterior bottom...
Separate names with a comma.
