Log in or Sign up
Antiques Board
Home
Forums
>
Antique Forums
>
Furniture
>
Boston Rocker: age and if worth repairing
>
Reply to Thread
Message:
<p>[QUOTE="Ladybranch, post: 203876, member: 44"]I’m in the midst of cleaning out the attic. <img src="styles/default/xenforo/clear.png" class="mceSmilieSprite mceSmilie48" alt=":grumpy:" unselectable="on" unselectable="on" /> Most is junk for (tossing), some is antique (family heirlooms), and a little is still possibly usable stuff and such. Yesterday stumbled on a Boston rocker my family has had stored for at least 80 years in attics from New England, Mississippi, Canada, to back to Massachusetts, and now for the past 25 years in our attic here in the mid-south. Growing up I never thought much about it up in the spooky attic. Lo and behold I believe it is the real deal dating to possibly the 1830s/40s. I don’t know when, where or from whom my mother got it. It could have been a family piece or she bought it in the 1940s planning to refinish it with stenciling, etc., but never got around to it. Gee, so many questions I should have asked, and of course I should have listened more.</p><p><br /></p><p>I’d love to know: is it as old as I think, do y’all think the cracked seat can be fixed without replacing the seat, and if fixable is it worth it. At this moment, I certainly don’t plan on selling it unless it turns out not to be as old as I think, hope.</p><p><br /></p><p>Reasons I think it is one of the early Boston rockers:</p><p>1. The seat curves up from the front to high in the back. From front to back is a plank that appears to be 1 piece of wood 1¼” thick. The front of seat scrolls/rolls down with an added piece of wood creating the roll. A large added chuck of wood was added to the back part of the seat to created the upward curve. That upward curve is a good 2" thick. The seat is low to the ground.</p><p>2. The maple arms have the same curvature as the seat.</p><p>3. The chair leans back quite low when at rest.</p><p>4. High back has 6 long spindles and a wide slightly curved top rail with remnants of a fruit and floral stencil across it. The back curves out slightly. The spindles and side rails have no turnings but are tapered at the top ends.</p><p>5. The spindles are not just attached to the seat but go all the way through the seat plank. Somewhere I read that later chairs had the spindles just barely embedded into the seat while early rockers had them deep into the seat.</p><p>5. Most importantly, one and possibly 2 of the legs still have a pin, or very very narrow nail, with a hole for a second pin attaching it the rocker. The attachments of the other legs to the rockers have been reworked/repaired with either nails or a screw. Somewhere I read that the earliest Boston rockers legs were attached to the rockers with 2 pins or with 2 very narrow nails.</p><p><br /></p><p>The structural condition is fair to poor. The legs, back and one arm are in good condition. The other arm where it attaches to the back side rail has damage at the top of that area. Someone tried to repair the area with some sort of putty a long time ago. The **big** problem is the seat. The 1½” thick wood of the seat is cracked down through the middle from front to back. About where the 1½” thick wood meets/joins the 2” thick curved wood there is a partial crack from left to right across the chair that may be following the joining of the 2 thicknesses of the wood. The left to right crack does not go through to the bottom. The seat is still stable.</p><p><br /></p><p>Decorative-wise, the black paint on the seat, back, legs, spindles, and bottom looks like it was wiped on to reveal a rust, reddish, undercoat. I don't know if the reddish paint is milk red at this point. The paint is crackled and badly worn in areas. In the badly worn areas the grain of the wood is quite visible especially on the front and back of the top rail and on the seat. There are remnants of fruit & floral stenciling on the top/crest rail, remnants of yellow ocher or gold partial rings around the turnings of the front legs and front stretcher. The spindles and side rails have yellow/gold partial rings, but again no turnings. If there was a stencil on the front of the seat, it is long gone, worn off.</p><p><br /></p><p>Dimensions:</p><p>Overall: Height to top rail: 39”, Width – widest at top rail: 24”, Depth from front of rockers to the top of the back when at rest: ~30”</p><p><br /></p><p>Seat: Height to top of seat: 16 ½”, height to the lowest part of the seat 13 ½”, width of front of seat: 18 ½”, widest point: 19 ½”, width at back: 14 ½”, depth from front to back: 19 ½”.</p><p><br /></p><p>Some of the following pics are misleading. I had to brighten most of them to see the details. The overall appearance of the chair is dark and faded with no real shine.</p><p><br /></p><p>--- Susan</p><p><br /></p><p>[ATTACH=full]58755[/ATTACH] </p><p><br /></p><p>[ATTACH=full]58756[/ATTACH] </p><p><br /></p><p>[ATTACH=full]58757[/ATTACH] </p><p><br /></p><p>[ATTACH=full]58758[/ATTACH] </p><p>Following pics show the cracks in the seat from top & bottom views:</p><p>[ATTACH=full]58760[/ATTACH] </p><p><br /></p><p>[ATTACH=full]58761[/ATTACH] </p><p><br /></p><p>[ATTACH=full]58763[/ATTACH] </p><p><br /></p><p>On this pic not only you see the crack has gone through to the bottom of seat, but can also see that the arm/side spindles go all the way through the seat.</p><p><br /></p><p>[ATTACH=full]58764[/ATTACH] </p><p><br /></p><p>Following pics of the arms. The composite pic shows: 1. hand hold of an arm, 2. the damaged the left arm, 3. right arm meeting the side rail and 4. screw hole attaching the right arm to the back side rail. The screw is partial covered with some sort of oldddd hardened fill. </p><p>[ATTACH=full]58766[/ATTACH]</p><p><br /></p><p>[ATTACH=full]58767[/ATTACH][/QUOTE]</p><p><br /></p>
[QUOTE="Ladybranch, post: 203876, member: 44"]I’m in the midst of cleaning out the attic. :grumpy: Most is junk for (tossing), some is antique (family heirlooms), and a little is still possibly usable stuff and such. Yesterday stumbled on a Boston rocker my family has had stored for at least 80 years in attics from New England, Mississippi, Canada, to back to Massachusetts, and now for the past 25 years in our attic here in the mid-south. Growing up I never thought much about it up in the spooky attic. Lo and behold I believe it is the real deal dating to possibly the 1830s/40s. I don’t know when, where or from whom my mother got it. It could have been a family piece or she bought it in the 1940s planning to refinish it with stenciling, etc., but never got around to it. Gee, so many questions I should have asked, and of course I should have listened more. I’d love to know: is it as old as I think, do y’all think the cracked seat can be fixed without replacing the seat, and if fixable is it worth it. At this moment, I certainly don’t plan on selling it unless it turns out not to be as old as I think, hope. Reasons I think it is one of the early Boston rockers: 1. The seat curves up from the front to high in the back. From front to back is a plank that appears to be 1 piece of wood 1¼” thick. The front of seat scrolls/rolls down with an added piece of wood creating the roll. A large added chuck of wood was added to the back part of the seat to created the upward curve. That upward curve is a good 2" thick. The seat is low to the ground. 2. The maple arms have the same curvature as the seat. 3. The chair leans back quite low when at rest. 4. High back has 6 long spindles and a wide slightly curved top rail with remnants of a fruit and floral stencil across it. The back curves out slightly. The spindles and side rails have no turnings but are tapered at the top ends. 5. The spindles are not just attached to the seat but go all the way through the seat plank. Somewhere I read that later chairs had the spindles just barely embedded into the seat while early rockers had them deep into the seat. 5. Most importantly, one and possibly 2 of the legs still have a pin, or very very narrow nail, with a hole for a second pin attaching it the rocker. The attachments of the other legs to the rockers have been reworked/repaired with either nails or a screw. Somewhere I read that the earliest Boston rockers legs were attached to the rockers with 2 pins or with 2 very narrow nails. The structural condition is fair to poor. The legs, back and one arm are in good condition. The other arm where it attaches to the back side rail has damage at the top of that area. Someone tried to repair the area with some sort of putty a long time ago. The **big** problem is the seat. The 1½” thick wood of the seat is cracked down through the middle from front to back. About where the 1½” thick wood meets/joins the 2” thick curved wood there is a partial crack from left to right across the chair that may be following the joining of the 2 thicknesses of the wood. The left to right crack does not go through to the bottom. The seat is still stable. Decorative-wise, the black paint on the seat, back, legs, spindles, and bottom looks like it was wiped on to reveal a rust, reddish, undercoat. I don't know if the reddish paint is milk red at this point. The paint is crackled and badly worn in areas. In the badly worn areas the grain of the wood is quite visible especially on the front and back of the top rail and on the seat. There are remnants of fruit & floral stenciling on the top/crest rail, remnants of yellow ocher or gold partial rings around the turnings of the front legs and front stretcher. The spindles and side rails have yellow/gold partial rings, but again no turnings. If there was a stencil on the front of the seat, it is long gone, worn off. Dimensions: Overall: Height to top rail: 39”, Width – widest at top rail: 24”, Depth from front of rockers to the top of the back when at rest: ~30” Seat: Height to top of seat: 16 ½”, height to the lowest part of the seat 13 ½”, width of front of seat: 18 ½”, widest point: 19 ½”, width at back: 14 ½”, depth from front to back: 19 ½”. Some of the following pics are misleading. I had to brighten most of them to see the details. The overall appearance of the chair is dark and faded with no real shine. --- Susan [ATTACH=full]58755[/ATTACH] [ATTACH=full]58756[/ATTACH] [ATTACH=full]58757[/ATTACH] [ATTACH=full]58758[/ATTACH] Following pics show the cracks in the seat from top & bottom views: [ATTACH=full]58760[/ATTACH] [ATTACH=full]58761[/ATTACH] [ATTACH=full]58763[/ATTACH] On this pic not only you see the crack has gone through to the bottom of seat, but can also see that the arm/side spindles go all the way through the seat. [ATTACH=full]58764[/ATTACH] Following pics of the arms. The composite pic shows: 1. hand hold of an arm, 2. the damaged the left arm, 3. right arm meeting the side rail and 4. screw hole attaching the right arm to the back side rail. The screw is partial covered with some sort of oldddd hardened fill. [ATTACH=full]58766[/ATTACH] [ATTACH=full]58767[/ATTACH][/QUOTE]
Your name or email address:
Do you already have an account?
No, create an account now.
Yes, my password is:
Forgot your password?
Stay logged in
Antiques Board
Home
Forums
>
Antique Forums
>
Furniture
>
Boston Rocker: age and if worth repairing
>
Home
Home
Quick Links
Search Forums
Recent Activity
Recent Posts
Forums
Forums
Quick Links
Search Forums
Recent Posts
Gallery
Gallery
Quick Links
Search Media
New Media
Members
Members
Quick Links
Notable Members
Registered Members
Current Visitors
Recent Activity
New Profile Posts
Menu
Search
Search titles only
Posted by Member:
Separate names with a comma.
Newer Than:
Search this thread only
Search this forum only
Display results as threads
Useful Searches
Recent Posts
More...